Technology
The 13,56 MHz RFID proximity wall reader is the perfect solution for access control in doors
where its closing element or deadbolt is an automatism: peripheral accesses, parking lots,
elevators, healthy areas, swimming pools, etc.
Off line operation way (Autonomous).
On line operation way (networked): See Smartair Wall Reader Updater datasheet. The wall
reader activates the closing element (electric, electromagnetic, motorized, etc. strikes) using
a relay. It needs an outside power source of 12V AC.
It offers the same benefits as the lock: User identification, time zone, audit trail of the events
(openings and attempts of openings), cancellation of lost or stolen cards, etc.
Compatible with NFC (Near Field Communication) mobile phones.
Meachanisam
The wall readers can activate or deactivate any electromechanic mechanism using a relay.
INHOVA offers a large variety of solutions.
Electric strikes
· When a basic safety level is needed: Common accesses, parking lots, etc.
· Fail secure (when there is a power cut the access is bloqued)
· Supply: 12V AC, 0,6A
Electromechanic locks
· When a high safety level is needed: Entrances, emergency exits, etc.
· Fail safe (when there is a power cut the access is free)
· Supply: 12Vdc/500mA or 24Vdc/250mA
Technical Features
READING UNIT
· Identification technology: RFID 13,56MHz Read and Write contactless chip.
· Reading distance: 10mm with standard credentials.
· The jack connecting to the Portable Programmer is in the reading unit
CONTROL UNIT
· Non volatile memory
· Audit trail up to 1500 users and 1000 events (openings and attempts of openings)
· Clock and calendar in real time. 14 time zones with 5 periods of time each of them
· Green and red warning LEDs. Different warnings: low battery level, denied access, etc
· Operation ways:
-Passage mode: Lock always opens
-First user: Lock in passage after the first access of an authorized user
-Standard: Operation by default. Card is needed for opening
-Double user: Two authorized users must approach their credential in order to open
CONNECTORS
· CN1: Supply: 12 to 24V DC and 12V AC
Consumption: 20mA
Consumption when the relay is working: 150mA
· CN2: RS485
· CN3: Relay exit: (NO, NC, C)
Cut capacity: 5A 250V AC/ 5A 30V DC
· CLR: Reset button to erase readers memory
OPERATION CONDITIONS
-Humidity: Up to 85% without condensation
Interior drainage in the reader
-Temperature: Between -10ºC and 80ºC
-Electric strikes noises: It is recommended the installation of the VARISTOR in the
electric strike to absorb the noises that it could produce. ONLY AC.
EMERGENCY EXITS
Antipanic UNIVERSAL device with electromechanic locks
· The electric signal activates the exterior handle or the engine that removes
the lever of the electromechanic lock
· Application: Interior exit devices
· Fail safe or fail secure (it depends on the model of electromechanic lock)
Antipanic motorized TEMPRO device
-An engine removes the latch of antipanic bar
-Application: Exterior exit devices
-Fail secure (When there is a power cut the access is blocked)
Antipanic TOP device
-A bar with highly developed technical features and in harmony with the
new architectonical trends
Download Brochure |
